Align funfly 2010

No Gravatar

2010 Align FunFly and World Invitational Movie by RCHeliResource.Com that is the title and it is a massive cool video from RCHeliResource.Com, a really high quality production that you need to watch. Warning it is a long video.

And a-lot more pictures and video from Runryder check here

There is interview with Lukas Riva and comments from Alan Szabo jr. and Jason Krause


Alan Szabo goes quadrocopter

No Gravatar

Smart phones can be used for alot of good thinks i know i used mine at 3D masters for updates my site from the flight line. But now Align(i thing) has found new ways of using the Iphone, controling a quadrocopter with an Iphone.

I am missing some 3D action with that quadrocopter


A peep into Align factory

No Gravatar

Here is a video from China with a look inside the Align factory and a short interview with Alan Szabo, i am sure it is an interesting interview if you can understand Chinese.

Her is one more video from RCHeliresources.com http://www.rcheliresource.com/videos/align2006-factorytour.wmv


Final review of the TZ-V2 Frenzy 90

No Gravatar

Now i finally got the review of the new Frenzy don, please have a look for an in-depth review of this great model. http://rcheli.dk/frenzy-90/

As you properly can remember from some of my previous post, i have had some problems with my engine running warm, but you can solved that problem, just by changing all the fuel tubs on the Frenzy, specially the tubs in the thanks was very thin and seemed to be a big problem for my engine. But the model is flying great now.

My starter engine finally died on my and i have to get a new one, i have concidering getting the Align but word is that the Align super starter (ASS) is not perfect for a 90 size engine and that is why i am getting a Dynatron 120 starter

IMG_7199.JPGIMG_7206.JPGIMG_7220.JPG


Okay first flight

No Gravatar

Made it to the flying field today, great. It was cold and windy but the Frenzy was airborne and got 3 flight don. After the first full tank i re-tighten the tail belt it was a little lose, perfectly normal after first flight with a new helicopter.
I did run into another problem with the heli, it was not related to the Frenzy but the engine.
When i was flying IDL2 and did some fast flying the engine started to get very hot and started to lean out, but it is properly because i had set my governor a little to high in IDL2.
IMG_2009.JPG
IMG_2010.JPG
I have been concidering for some time if i should get the Align Super Starter, as you can see but i have not been 100% sure that it was a good starter for a 91 engine in the cold winters here in Denmark.

I then decided to fix my old starter, the new Frenzy has a one-bearing in the starter shaft that was great new, because my old starter wand one-way was broke. I mounted a new starter wand and two lipos on the side resulting in great power for the starter engine.
In combination with my new glow plug starter i can walk to the flight line and start my engine and not in the pilot area with my starter box. See pictures with my new starter and my glow plug starter with a meter on.
IMG_2014.JPG
IMG_2015.JPGIMG_2016.JPGIMG_2017.JPGIMG_1945.JPG